General
FAHM Co. ULM84 Series is a fixed mounted, Ultrasonic Level Transmitter with Fix-in the air and used for non-invasive measurement.
Our microprocessor based, user friendly, field programmable level measurement technique allows no interruption of the process Level and has low installation costs.
Features
-
Simple set-up and operation
-
Fast & simple to install & configure
-
Loop-powered 4-20 mA output with HART signal
-
Low cost of installation & commissioning
-
Non-contact level measurement
-
Exclusive sensor for level transmitter
-
Response time less than 2 second
-
Anti-Corrosive Sensor Probe
Specification
|
Measuring Principle
|
Process Temperature
|
|
Ultrasonic Level Measurement
|
-40~80 oC (Standard)
|
|
Measuring Range
|
Process Pressure
|
|
0-5 m, 0-10 m
|
-0.8~2.0 bar
|
|
Dead Band
|
Power Supply
|
|
35, 50 Cm for above Ranges Respectively
|
14-36 VDC
|
|
Display
|
Power Consumption
|
|
4 Line LCD with Bar graph (illumination)
|
Less than 1W
|
|
Resolution
|
Output
|
|
1 mm
|
4–20 mA (Standard), 4–20 mA with Digital Signal Based on HART Protocol (Optional)
|
|
Accuracy
|
|
+/-0.25% of Full Scale
|
Load
|
|
Repeatability
|
Rohm= (VDC-14) * 50 Ω
|
|
+/-0.1% of Reading
|
Alarm (Programmable Transistor Output)
|
|
Sensor Head Materials
|
High-High, High, Low, Low-Low
|
|
Polyurethane, ETFE (Anti-Corrosive)
|
Temperature Compensation
|
|
Housing
|
Built-in to compensate over temperature
|
|
Plastic, Die-Cast Aluminum, Explosion Proof (IP 67)
|
Data Storage
|
|
Update Time
|
Operation parameters and Configuration
|
|
< 2 s
|
Installation
|
|
Ambient Temperature
|
G1.5" for Range 5 meter, G2" for Other Ranges (Standard), Flange and Bracket (Optional)
|
|
-20~85 oC
|
|
Relative Humidity
|
Dimensions
|
|
0-100% RH
|
157 mm (W) * 282 mm (H) * 126.5 mm (D)
|
|
Sensor Frequency
|
|
|
50, 40 and 25 kHz
|
|
|
Blanking Distance
|
|
|
0.35-0.8 m
|
|
|
Beam Angle
|
|
|
11o
|
|
|
Start-up current
|
|
|
3.6 mA
|
|
